3 min read
What each stage changes, what Stage 2 needs that Stage 1 doesn't, and how to tell which one makes sense for the way you drive.
"Stage 1" and "Stage 2" get thrown around as if everyone agrees on what they mean. They don't. Every tuner draws the line a little differently. But the idea underneath is the same everywhere, and once you see it, choosing between them gets a lot easier.
Stage 1: software on a stock car
A Stage 1 tune changes the engine's software and nothing else. The car keeps its factory intake, exhaust, intercooler and turbo. The tune raises boost, adjusts ignition timing and fuelling, and usually lifts the speed and torque limiters the factory set.
On a modern turbo engine this is where the biggest gain per dollar is. The factory leaves a margin for bad fuel, extreme heat and owners who never change their oil. A good Stage 1 uses some of that margin, not all of it.
What you notice: the car pulls harder in the mid range, overtakes need fewer downshifts, and the throttle feels less lazy. Fuel economy on the highway barely changes if you drive the same way. Nobody drives the same way.
Stage 2: software written for supporting parts
Stage 2 is still a software tune, but it's calibrated for parts that let the engine breathe and stay cool. On most turbo cars that means:
- A downpipe. The pipe straight after the turbo. The factory one is narrow and usually holds a catalytic converter. A freer flowing one lets the turbo spool faster and make boost with less heat.
- An intake. Less restriction before the turbo.
- An intercooler. Often the most important part on cars that see heat. More on that below.
The parts alone do very little. It's the software, written to use them, that makes the gain. That's why fitting a downpipe to a car on a Stage 1 tune isn't Stage 2.
The part people forget: heat
A turbo squeezes air, and squeezed air gets hot. Hot air is less dense, so the engine makes less power and the computer pulls timing to protect itself. A small factory intercooler fills with heat after one or two hard pulls, and on a 95 degree Orlando afternoon it happens sooner.
So a Stage 2 car with a proper intercooler doesn't just make more peak power. It makes that power on the third pull as well as the first. For a lot of our customers that matters more than the headline number.
Fuel
Both stages here are written for 93 octane, which most Florida stations sell as premium. Some cars can run ethanol blends for more power, but E85 is hard to find in Central Florida, and a tune that needs it is a tune you'll have to plan your fill-ups around.
Which one is right for you
Stage 1 is usually right if:
- The car is your daily, and you want it quicker without changing how it sounds or drives day to day
- You want to keep the car as close to stock as possible
- You're not sure yet how far you want to go
Stage 2 is usually right if:
- You already know Stage 1 won't be enough
- The car sees track days, or a lot of hard driving in the heat
- You're happy with a louder car and the parts that come with it
Things to check before Stage 2
- Emissions and warranty. A downpipe usually removes or changes a catalytic converter. That can matter for your warranty and for whether the car is legal on the road. Ask us before you buy parts.
- The clutch. On a manual car, the stock clutch is often the first thing to slip after Stage 2.
- The gearbox. Many automatics limit torque in software, and may need their own tune to hold the extra.
See the figures for your car
Every car with a package on this site shows Stage 1 and Stage 2 side by side: power, torque, the parts each one needs and where pricing starts. Find your car, or put two stages next to each other in Compare.
See the figures for your car
Find your car